This Newport LED mirror features an adjustable color temperature, allowing you to choose between cool/day or warm light. It has a touchless control system with a motion sensor proximity radar that controls the entire device on and off. To use the push - button: press to turn on, select the light color, and hold to turn off. For the motion sensor: press to turn on, select the color, leave the light on the preferred color, move away for 60 seconds until it turns off by itself (the button will turn blue), wave your hand to test it, and walk away to turn it off after 60 seconds.
Using your Newport LED mirror is a breeze. First, for the push - button function: just press the button to turn on the mirror light. You can then choose between cool/day or warm light according to your needs. When you want to turn it off, hold the button until the light goes out. For the motion sensor: press the button to start. Select your preferred light color and leave the light on that setting. Then move away from the mirror and wait for 60 seconds. The light will turn off on its own, and the button will turn blue, indicating the motion sensor is activated. You can wave your hand in front of the sensor to check if it's working. To turn off the mirror with the motion sensor, simply walk away and it'll turn off after 60 seconds. As for maintenance, keep the mirror clean with a soft, dry cloth. Avoid using harsh chemicals as they may damage the finish. Also, make sure the installation area is dry to prevent any electrical issues.
